Under Cover Fabworks, LLC » guard http://blog.undercoverfab.com Keep up with undercoverfab.com Fri, 11 Nov 2011 01:11:33 +0000 en hourly 1 http://wordpress.org/?v=3.3 Aluminum Corner Guards http://blog.undercoverfab.com/2011/01/aluminum-corner-guards/ http://blog.undercoverfab.com/2011/01/aluminum-corner-guards/#comments Sun, 09 Jan 2011 00:47:59 +0000 Matthew Walton http://blog.undercoverfab.com/?p=527 Testing a prototype corner for the Jeep Unlimited LJ. This one is 3/16″ 6061-T6 aluminum. It weighs about 16 lbs. The prototypes fit great so it shouldn’t be long until these are available.

]]> http://blog.undercoverfab.com/2011/01/aluminum-corner-guards/feed/ 0 UCF Corporate 14 Bolt Pinion Guard http://blog.undercoverfab.com/2010/01/ucf-corporate-14-bolt-pinion-guard/ http://blog.undercoverfab.com/2010/01/ucf-corporate-14-bolt-pinion-guard/#comments Fri, 29 Jan 2010 02:57:54 +0000 Matthew Walton http://blog.undercoverfab.com/?p=198 UCF Corporate 14 Bolt Pinion Guard

UCF Corporate 14 Bolt Pinion Guard

UCF Corporate 14 Bolt Pinion Guard

The UCF 14 Bolt Pinion Guard is a great little piece of insurance that can save your wheelin’ trip for a small amount of money.  It is laser cut from 1/4″ thick carbon steel plate and formed from one piece of material.  It is then fully welded on the outside edges to make it hold its shape under the full weight of your rig.  Fits any yoke size.  Installs in minutes.  Ships bare of paint without hardware.  Reuse your factory bolts.

]]> http://blog.undercoverfab.com/2010/01/ucf-corporate-14-bolt-pinion-guard/feed/ 0