Under Cover Fabworks, LLC » bumper

Just Released – Rear Rock Bumper for ’87-’06 Wranglers

Matthew Walton — Tue, 08 Dec 2009 21:46:16 +0000

Rear Rock Bumper for '87-'06 Wranglers - Front View

Rear Rock Bumper for '87-'06 Wranglers - Back View

Under Cover Fabworks is pround to announce the release of the UCF Rear Rock Bumper for ’87-’06 Wranglers (YJ & TJ)

The UCF Rear Rock Bumper for ’87-’06 Jeep Wranglers was designed to take a hit. You can drag it over every rock in the off-road park then still use it to hold you bike rack on Monday. Constructed of 1/4″ and 3/16″ carbon steel plate and fully welded inside and out, this thing can take a beating.

It bolts-on to ’87-’06 model Jeep Wrangler vehicles. Comes with a 2″ receiver hitch fully welded front and back. Bolts to your Jeep with 10 bolts (not included). Some early model Wranglers may require you to drill the middle 4 holes into your rear cross-member.

The bumper is almost 54″ wide to provide some protection to your rear quarters from below. It will arrive ready to prime, paint and bolt to your rig.

Cover your ass with a product that will outlast your Jeep.

58″ Wide Jeep TJ Front Bumper is Available Now!

Matthew Walton — Wed, 18 Nov 2009 20:55:51 +0000

Front Rock Bumper for '87-'06 Wranglers

Front Rock Bumper for '87-'06 Wranglers - Installed

I finally got a chance to add the newly prototyped 58″ TJ Front Bumper to the online store. They will be sold for the introductory price listed on the store for a limited time. Protect those fenders from trail damage, get yours today!

Front Rock Bumper for ’87-’06 Jeep Wranglers – YJ & TJ (Shown with OPTIONAL Tube Work)

The 58″ UCF front bumper was designed with fender protection in mind. Too many times while off-road with lockers engaged we try to make a corner only to realize that were not gonna make it. Often I will just power through the corner to get the rear end to come around. This has led to more bent fenders than I care to count.

The width of this bumper is only 1″ shy of covering the full width of the front end. The bumper ends are angled back to help shed-off obstacles as you go. Constructed fully of 3/16″ steel plate this bumper is fully welded and the exposed top and front welds are ground smooth.

It will arrive ready to prime and paint then be bolted to your frame with the factory hardware. There is plenty of room for mounting of factory or aftermarket fog lights.

Protect those fenders with a product that will outlast your Jeep.

Winch Plate must be purchased seperately.

Front Bumpers on the way!

Matthew Walton — Wed, 11 Nov 2009 21:55:52 +0000

It won’t be too much longer until our new TJ front bumper is up for sale on the website. The prototype was built and installed on my personal Jeep LJ selveral months ago. It looked great and held up to a ton of abuse. I tweaked the design a little and sent the final revision to the laser shop for production. I should have the part next week and have the finished product built out and installed by following weekend. Expect to see the new bumpers for sale on the website in a couple weeks.