Under Cover Fabworks, LLC » bracket http://blog.undercoverfab.com Keep up with undercoverfab.com Fri, 11 Nov 2011 01:11:33 +0000 en hourly 1 http://wordpress.org/?v=3.3 14 Bolt Full Floater Disk Brake Brackets http://blog.undercoverfab.com/2010/01/14-bolt-disk-brake-brackets-14-bolt-full-floater-disk-brake-brackets/ http://blog.undercoverfab.com/2010/01/14-bolt-disk-brake-brackets-14-bolt-full-floater-disk-brake-brackets/#comments Wed, 20 Jan 2010 19:30:22 +0000 Matthew Walton http://blog.undercoverfab.com/?p=175 14 Bolt Disk Brake Brackets

14 Bolt Full Floater Disk Brake Brackets

The UCF 14 Bolt Full-Floated Disk Brake Brackets make quick work of upgrading the brakes on your old Corporate 14 Bolt.  They bolt directly to the backing plate flange and allow you to use the common and inexpensive front caliper and rotor from a 71-86 GM 3/4 ton truck.

They are laser cut from 3/8″ carbon steel plate and bent to the correct offset to avoid longer bolts and spacers (which can lead to failure).  They ship in bare unpainted steel without mounting hardware as you can re-use the factory bolts to attach the bracket and the caliper bolts come with the caliper.

]]> http://blog.undercoverfab.com/2010/01/14-bolt-disk-brake-brackets-14-bolt-full-floater-disk-brake-brackets/feed/ 0 Yet Another New Product – HD Lower Control Arm Mounts for Jeep TJ, LJ & XJ http://blog.undercoverfab.com/2009/12/yet-another-new-product-hd-lower-control-arm-mounts-for-jeep-tj-lj-xj/ http://blog.undercoverfab.com/2009/12/yet-another-new-product-hd-lower-control-arm-mounts-for-jeep-tj-lj-xj/#comments Fri, 11 Dec 2009 16:53:23 +0000 Matthew Walton http://blog.undercoverfab.com/?p=105

HD Lower Control Arm Mounts for Jeep TJ, LJ & XJ

HD Lower Control Arm Mounts for Jeep TJ, LJ & XJ

HD Lower Control Arm Mounts for Jeep TJ, LJ & XJ for Dana 30 & Dana 44

UCF is now offering replacement axle-side lower control arm mounts for Jeep TJ, LJ & XJ vehicles.  This is the part of the factory suspension that’s usually first to go.  They rip-off the axle on the trail and strand you at the worst possible time.

Our lower control arm mounts are fabricated from 3/16″ carbon steel plate and ship bare of paint and ready to weld onto your rig.  The material is doubled up on the sides to give you a total thickness of 3/8″.  They accomodate the use of the factory cam-bolts.  Sold in pairs, enough to do a whole axle.

This may be the strongest replacement lower control arm mount in existance.  Other companies use flimsy horse-shoe shaped tabs to hold the cam bolts steady (where all the force is really transfered in a hard brake or acceleration in 4WD).  Our bracket is designed so that the cam bolt rests against the strongest part of the bracket; the part welded directly to the axle tube.

Order a pair today.

]]> http://blog.undercoverfab.com/2009/12/yet-another-new-product-hd-lower-control-arm-mounts-for-jeep-tj-lj-xj/feed/ 0